When I disassambled the Instrument Cluster, I had to remove the needle of the Speedometer. Unfortunately I did not mark the original position of the needle and so my speedometer shows about 10 mph too less. I know of 3 methods to get the current speed:
1. Add the difference (10mph in my case)
2. Use the speedometer of your GPS with your Smartphone or Navigation System
3. Use one of the following tables in your car and get the speed from gear and from engine turns per minute:
Automatic
Manual
1. Add the difference (10mph in my case)
2. Use the speedometer of your GPS with your Smartphone or Navigation System
3. Use one of the following tables in your car and get the speed from gear and from engine turns per minute:
Automatic
| Mph | |||||||||
| GEAR | 20 | 30 | 45 | 60 | 75 | 80 | 100 | 120 | 135 |
| 3 | 1300 | 1900 | 2600 | 3200 | 3400 | 4200 | 5000 | 5700 | |
| 2 | 1200 | 2000 | 2700 | ||||||
| 1 | 1900 | 3200 | |||||||
Manual
| Mph | |||||||||
| GEAR | 20 | 30 | 45 | 60 | 75 | 80 | 100 | 120 | 135 |
| 5 | 2300 | 2800 | 3000 | 3700 | 4400 | 5000 | |||
| 4 | 2100 | 3000 | |||||||
| 3 | 2000 | 2800 | |||||||
| 2 | 1900 | 2900 | |||||||
| 1 | 2900 | ||||||||